Yakima CoreBar Steel Crossbars Installation - 2018 Chevrolet Impala- Video

Adam: Hi, everyone. Adam with etrailer.com. Today, we're going to be taking a look at the Yakima CoreBar roof rack system on our 2018 Chevrolet Impala. So, these are going to be a really good addition to our Impala to get a bunch of different attachments on top. Any clamp-on styles attachment will be able to fit around these bars, so you don't have all that clutter inside your car. These are going to be 60 inches long and they are going to have a steel construction giving them a 220-pound load capacity. more

Watch Video

9/19/2019 10:42:40 AM

Yakima Roof Rack Review - 2018 Chevrolet Impala- Video

Adam: Hi everyone. Adam with etrailer.com. Today we're going to be taking a look at the Yakima JetStream Roof Rack System on our 2018 Chevrolet Impala. So this is going to be a really good addition to your Impala. We're going to be able to put a whole lot of attachments that we carry here at etrailer.com. We do have a couple of cargo baskets that are really nice and will go good with this look of these bars. more

Watch Video

9/19/2019 10:42:21 AM

SeaSucker Roof Rack Review - 2018 Chevrolet Impala- Video

Adam: Hi everyone, Adam with etrailer.com. Today we're going to be taking a look at the SeaSucker Monkey Bars on our 2018 Chevrolet Impala. So I would say the biggest benefit to these SeaSuckers is, you really don't need a whole lot to install them. You have these all completely pre-assembled. You pull them out of your trunk, you put them on there, pump it up, ready to go. A lot of the normal type of roof racks, they require a lot of different pieces, it requires tools. more

Watch Video

9/19/2019 10:37:26 AM

Rhino Rack Roof Rack Review - 2008 Chevrolet Impala- Video

Today on our 2008 Chevrolet Impala, we'll be taking a look at and showing you how to install the Rhino-Rack Roof Rack System. This is going to consist of part #RRVA126B-2. That's going to be our Rhino Rack Vortex Aero Crossbars. You can also get these in silver, part #RRVA126S-2. Part #RRRLKVA, that's going to be our 2500 series legs, and part #DK187, that's going to be our fit kit for our Impala. The Rhino-Rack Vortex Arrow Crossbar System is a perfect crossbar system for carrying your bike racks, water sport carriers, or ski and snowboard carriers on your vehicle's make of roof. The aerodynamic shape of the bar is going to help to reduce wind noise and drag, and the weather strip at the top is easy to remove to help accommodate channel-mounted accessories. The foot-pack system comes with a lockable cover to help prevent any thefts or tampering of your roof rack system as a whole. more

Watch Video

5/8/2017 10:42:17 AM

Yakima Q Tower Roof Rack Installation - 2014 Chevrolet Impala- Video

Today on our 2014 Chevy Impala, we'll be test fitting the Yakima Q Towers Roof Rack System using the 58 inch load bars. We'll be using part numbers Y00409, Y00723, Y00732 and Y00124. With everything assembled according to included instructions, we'll begin our test fit by placing the front cross bar onto the front of our roof. Now we'll need to measure nine inches from the leading edge of the glass to the leading edge of our Q Tower. We'll need to make this measurement on both the passenger and driver's side of the vehicle. Making this measurement on both sides will ensure the front crossbar is perpendicular to the roof of our Impala. Once we have the bar in position, we'll tighten down the silver thumb screw on the inside of the tower and clamp down the black plastic covers. Clamping down the cover is going to bring the clip up tightly against the roof line. more

Watch Video

4/24/2014 11:22:10 AM

  1